Why is My Orbeez Gun Not Shooting?
Is your orbeez gun not shooting? The orbeez guns are a great product, but many people find it very frustrating to start shooting with them.
The orbeez gun doesn’t shoot well for many different reasons. It’s very possible that you can overcome these issues, but first, you need to know what these problems are.
So, let’s look at the most common reasons why your orbeez gun is not shooting.
Why is My Orbeez Gun Not Shooting?
There are a few reasons for your Orbeez gun not working properly. The most common reason is that the gun is not filled with enough water. Make sure to check the water level and top it off as needed.
Another possibility is that the Orbeez are too dry. Try adding a little bit of water to the Orbeez and see if that makes a difference. If neither of these solutions works, it is possible that there is something blocking the nozzle of the gun.
Check the nozzle for any dirt or debris and clean it off if necessary. Finally, make sure that the gun is pointing in the right direction. The Orbeez will only shoot straight, so if the gun is pointing up or to the side, the Orbeez will not come out.
If you have tried all of these things and the Orbeez gun still isn’t working, it might be time to buy a new one.
Common Reasons for Orbeez Gun not Shooting
Orbeez guns are a fun way to shoot water balloons and they are also fun to use. But, when your Orbeez gun does not work, it can be very frustrating.
Orbeez guns are fun to shoot, and when the gun works, they are extremely satisfying. But what happens when the gun jams up and doesn’t shoot the balloons?
Some common problems with Orbeez guns are mentioned below. We have a list of common causes when Orbeez guns don’t work.
1. Loose Ball – check the balls for loose, cracking, or missing pieces
2. Ball Rack – make sure the balls are going in the rack all the way or not
3. Ball Leak – check the seal around the ball
4. Ball Oil – check the oil level on the ball
5. Air Leak – check the dust cap and air filter
6. Air Pressure – make sure the air compressor has proper pressure
7. Air Control – make sure you have the proper air pressure to control the intake
8. Motor – make sure there are no obstructions in the motor that interfere with the ball from entering and exiting
9. Power – make sure power is turned on
10. Target – make sure all the targets on the gun are facing the right direction
These are some of the main common problems which we have to check when Orbeez gun not shooting.
If any of these common problems have happened to you, then the solution is very simple. Just follow the solution given beside the problems.
How to Fix Orbeez Gun Not Shooting
Orbeez gun not shooting properly. There are a few reasons why this might be happening:
1) Orbeez gun is dirty
Orbeez gun should be rinsed off after each use. The water chamber should not be filled to capacity. The gun should be rinsed off under a running faucet. If the gun becomes completely clogged, it will need to be replaced.
2) Orbeez gun is dry
Orbeez gun should be filled with water and left to soak for a few minutes. If the gun is not soaking properly, it will need to be soaked.
3) Orbeez gun is frozen
Orbeez gun should be thawed before use. The gun should be thawed by letting it soak in a bowl of water or placing it in warm water for 15 or so minutes.
4) Orbeez gun has dried or cracked water chamber
Orbeez gun should be filled with enough water to cover the nozzle. If the water chamber has a cracked or dry spot, it will need to be replaced.
5) Orbeez gun is clogged
Orbeez gun should be rinsed off and dried before use. If the gun is clogged, it will need to be checked properly and clear the issues.
6) Orbeez gun is out of power
Orbeez gun should be plugged into a power source (either a wall outlet or car charger).
7) Orbeez gun is damaged
Orbeez gun should be inspected for damage or wear. If any part of the gun is damaged or worn, it will need to be repaired to get to working condition.
These are the 7 Main vital things (or problems) to check when Orbeez gun not shooting properly. You can try these solutions when you face the problem with orbeez gun.
If you face any problem with your orbeez gun, you can post your question in the comment box below. We will be glad to help.
How To Unjam Orbeez Gun?
Is your Orbeez gun jammed? If the Orbeez is not coming out of the gun, it is probably because something is blocking the nozzle.
The first thing you should do is check the nozzle for any dirt or debris. If you find anything, use a paper clip or something similar to clear it out. Once the nozzle is clear, try adding a little bit of water to the Orbeez and see if that makes a difference.
If the Orbeez is still not coming out, it is possible that the gun is jammed. To fix this, you will need to disassemble the gun and clear out any debris that might be blocking the mechanism. If you have tried all of these things and the Orbeez gun still isn’t working, it might be time to buy a new one.
Conclusion
In order to know why your orbeez gun not shooting, you must first identify the problem. In this troubleshooting guide, we have covered the most common reasons why your orbeez gun is not shooting.
We hope this post has helped you correct the issue. Please let me know if you have any questions. Happy shooting!
